文章摘要
李海连,李建永,罗春阳,王明旭,高兴华.大型精密仪器运输包装箱设计及试验[J].包装工程,2018,39(17):124-128.
LI Hai-lian,LI Jian-yong,LUO Chun-yang,WANG Ming-xu,GAO Xing-hua.Design and Experiment of the Transportation Packaging Box for Large-scale Precision Instruments[J].Packaging Engineering,2018,39(17):124-128.
大型精密仪器运输包装箱设计及试验
Design and Experiment of the Transportation Packaging Box for Large-scale Precision Instruments
投稿时间:2018-04-23  修订日期:2018-09-10
DOI:10.19554/j.cnki.1001-3563.2018.17.020
中文关键词: 包装箱  有限元分析  气密性  运输包装
英文关键词: packaging box  finite element analysis  airtightness  transport packing
基金项目:国家国防科技工业局项目(2013010011);吉林省教育厅科学技术研究项目(JJKH20170032K);二期包装箱研制项目(20161220)
作者单位
李海连 北华大学 机械工程学院吉林 132021 
李建永 北华大学 机械工程学院吉林 132021 
罗春阳 北华大学 机械工程学院吉林 132021 
王明旭 北华大学 机械工程学院吉林 132021 
高兴华 北华大学 机械工程学院吉林 132021 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了在控制包装箱整体重量的同时,提高包装箱的气密性及承压能力,对大型精密仪器运输包装箱的结构进行设计及优化。方法 针对精密仪器运输过程中“气体保护及密封性”的需求,设计钢骨架与玻璃纤维复合的箱体结构,并利用有限元仿真对设计方案进行分析评估,最后进行箱体的承压试验与气密性试验。结果 箱体在极端工况下的最大变形量为4.82 mm,在建立的箱内温度和大气压补偿模型基础上,包装箱泄露率仅为520.5 Pa/48 h。结论 采用钢骨架与玻璃纤维复合的箱体结构,满足了大型精密仪器运输的承压及密封性要求,为大型密闭箱体设计及试验提供了参考。
英文摘要:
      The work aims to design and optimize the structure of the large-scale precision instrument transport packaging box to improve the airtightness and pressure bearing capacity of the packaging box while controlling the overall weight of the packaging box. According to the demand of "gas protection and sealing" during the transportation of precision instruments, a packaging box structure combined with steel frame and glass fiber was designed. The finite element simulation was used to analyze and evaluate the design scheme, and finally the pressure test and airtightness test of packaging box were conducted. The maximum deformation of the packaging box under extreme working conditions was 4.82 mm. Based on the in-box temperature and atmospheric pressure compensation model established, the leakage rate of the packaging box was only 520.5 Pa/48 h. In conclusion, the packaging box structure combined with steel frame and glass fiber meets the pressure bearing and sealing requirements for the transportation of large-scale precision instruments, and provides a reference for the design and testing of large sealed containers.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22639403位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号