文章摘要
邵文庆,范虎军.平口断点密封袋包装机包覆机构电气控制设计[J].包装工程,2018,39(17):182-186.
SHAO Wen-qing,FAN Hu-jun.Electrical Control Design of the Wrapping Mechanism of the Flat Breakpoint Sealing Bag Packaging Machine[J].Packaging Engineering,2018,39(17):182-186.
平口断点密封袋包装机包覆机构电气控制设计
Electrical Control Design of the Wrapping Mechanism of the Flat Breakpoint Sealing Bag Packaging Machine
投稿时间:2017-09-29  修订日期:2018-09-10
DOI:10.19554/j.cnki.1001-3563.2018.17.030
中文关键词: 平口断点密封袋包装机包覆机构  PLC  伺服电机
英文关键词: flat breakpoint sealing bag packaging machine wrapping mechanism  PLC  servo motor
基金项目:
作者单位
邵文庆 永城职业学院 a.机电工程系永城 476600 
范虎军 永城职业学院 b.教务处永城 476600 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 分析平口断点密封袋(又称连卷袋)包装机包覆机构的特点,设计出平口断点密封袋包装机电气控制电路。方法 利用PLC发给伺服驱动器控制指令,由伺服驱动器控制伺服电机。结果 该系统包装产品速度可达4300 个/h左右,采用该系统包装后,与人工包装相比,省时省力,包装动作标准统一,包装位置精确、美观,无折叠现象,包装特性非常优良。结论 该系统成功解决了人工包装平口断点密封袋包的难题,降低了工人的劳动强度,提高了企业生产效率。
英文摘要:
      The work aims to analyze the characteristics of the wrapping mechanism of the flat breakpoint sealing bag (also known as the roll-wrapping bag) packaging machine and design the electrical control circuit of the flat breakpoint sealing bag packaging machine. PLC was used to send the control command to the servo driver which controlled the servo motor. The system's product packaging speed could reach about 4,300 pcs/h. After the system was used for packaging, compared with the artificial packaging, both time and labor were saved, the packaging action was standard and uniform, the packaging position was accurate and aesthetic without folding, and the packaging characteristics were very good. The system successfully solves the problem of artificial packaging flat breakpoint sealing bags, reduces the labor intensity of workers and improves the production efficiency of enterprises.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22548062位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号