文章摘要
张国伟,刘雪宇,史梦晴,张雅伟,刘炤彤,康星瑜,张帅.无底纸标签打印机传纸系统的防粘性研究[J].包装工程,2019,40(3):212-217.
ZHANG Guo-wei,LIU Xue-yu,SHI Meng-qing,ZHANG Ya-wei,LIU Zhao-tong,KANG Xing-yu,ZHANG Shuai.Anti-sticking Materials for Portable Thermal Printer[J].Packaging Engineering,2019,40(3):212-217.
无底纸标签打印机传纸系统的防粘性研究
Anti-sticking Materials for Portable Thermal Printer
投稿时间:2018-06-29  修订日期:2019-02-10
DOI:10.19554/j.cnki.1001-3563.2019.03.032
中文关键词: 无底纸热敏打印机  防粘性  剥离力  粗糙度  接触角
英文关键词: no backing sheet thermal printer  anti-sticking  peeling force  roughness  contact angle
基金项目:天津科技大学实验室开放基金(1706A301)
作者单位
张国伟 天津科技大学天津 300222 
刘雪宇 天津科技大学天津 300222 
史梦晴 天津科技大学天津 300222 
张雅伟 天津科技大学天津 300222 
刘炤彤 天津科技大学天津 300222 
康星瑜 天津科技大学天津 300222 
张帅 天津科技大学天津 300222 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了解决无底纸不干胶标签打印机传纸结构防粘性差导致传纸不畅的问题。方法 主要从传纸通道和胶辊的材质入手,选择硅橡胶、PTFE板、硅油纸、PP/PE混合塑料、PE塑料、玻璃纸、OPP和OPC混合塑料等多种材料,测试其防粘性能,从而优选出适用于无底纸热敏打印机传纸系统材质。通过测试常温下材料的接触角、粗糙度及剥离力,并对比分析与防粘性能的关系,综合得出材质的防粘性能评价。结果 硅橡胶和硅油纸相对于PTFE等材质,其综合防粘性能较好,接触角都在110°以上,剥离力在0.16 N以下。结论 考虑到表面强度和使用寿命问题,硅橡胶材质更适用于无底纸热敏打印机胶辊材质,而硅橡胶和PTFE材质较适合于传纸通道材料。
英文摘要:
      The work aims to solve the sticky problem caused by the poor anti-sticking properties of paper transferring structure in the bottomless adhesive label printer. Considering the material for the paper passageway and the rubber roll, a variety of materials such as silicone rubber, PTFE, silicon oil paper, PP/PE mixed plastic, PE plastic, glass paper, OPP and OPC mixed plastic were selected and tested for anti stickiness property, so as to select the suitable material for the no backing sheet portable thermal printer. By testing the contact angle, roughness and peeling force of the material at room temperature, and comparing and analyzing the relationship with the anti sticking property, the evaluation of anti sticking performance for these materials was obtained. Silicone rubber and silicone paper had better anti sticking properties, compared with PTFE, and had contact angle above 110° and the peeling force below 0.16 N. However, considering the surface strength and service life, the silicone rubber is more suitable for the paper roller and paper passing material for the no backing sheet portable thermal printer.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20801452位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号