文章摘要
赵海文,李锋,赵亚川,齐兴悦.基于YOLO模型的机器人电梯厅门装箱状态快速识别方法[J].包装工程,2019,40(7):180-185.
ZHAO Hai-wen,LI Feng,ZHAO Ya-chuan,QI Xing-yue.Rapid Recognition Method for Loading State of Robot Elevator Hall Door Based on YOLO Model[J].Packaging Engineering,2019,40(7):180-185.
基于YOLO模型的机器人电梯厅门装箱状态快速识别方法
Rapid Recognition Method for Loading State of Robot Elevator Hall Door Based on YOLO Model
投稿时间:2018-12-04  修订日期:2019-04-10
DOI:10.19554/j.cnki.1001-3563.2019.07.027
中文关键词: 电梯厅门  机器人装箱  YOLO模型  状态识别
英文关键词: elevator hall door  industrial robot packing  YOLO model  state recognition
基金项目:
作者单位
赵海文 河北工业大学 机械工程学院天津 300130 
李锋 河北工业大学 机械工程学院天津 300130 
赵亚川 河北工业大学 机械工程学院天津 300130 
齐兴悦 河北工业大学 机械工程学院天津 300130 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 针对电梯厅门柔性生产线机器人装箱后厅门状态识别问题,提出一种基于YOLO模型的电梯厅门装箱状态快速识别方法。方法 采用工业相机采集装箱后厅门图像信息,并制作成样本训练集,然后将训练集输入到目标识别分类检测模型中,通过调整网络结构参数进行迭代训练。结果 经过测试验证,文中提出的识别方法对装箱后厅门的状态分类识别成功率在99%以上,而且识别速度明显优于传统机器视觉处理算法。结论 文中提出的厅门装箱状态快速识别方法,可有效解决工业环境中复杂多变光照因素对传统机器视觉处理算法造成的识别效率低、误判率高等问题,并能满足生产系统节拍要求。
英文摘要:
      The work aims to propose a method for rapidly recognizing the state of the elevator hall door based on the YOLO model for the problem of the elevator hall door packing state recognition in the flexible production line robot of elevator hall door. The industrial camera was used to capture the container image and make a sample training set. Then the training set was input into the target recognition classification detection model, and iterative training was performed by adjusting the network structure parameters. After testing and verification, the recognition method proposed had a success rate of more than 99% for hall door state recognition, and the recognition speed was obviously superior to the traditional machine vision processing algorithm. The rapid recognition method for hall door packing state proposed can effectively solve the problems of low recognition efficiency and high misjudgment rate of traditional machine vision processing algorithms due to complex and variable illumination factors in industrial environment, and can meet the beat requirements of production system.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21137208位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号