文章摘要
孟坤鹏,李永祥,徐雪萌,唐静静,李飞翔,陈静.粉体除静电离子风风场对粉体包装充填影响的模拟研究[J].包装工程,2019,40(15):170-174.
MENG Kun-peng,LI Yong-xiang,XU Xue-meng,TANG Jing-jing,LI Fei-xiang,CHEN Jing.Simulation Study on the Effect of Air Field of Powder De-static Ion on Powder Packing and Filling[J].Packaging Engineering,2019,40(15):170-174.
粉体除静电离子风风场对粉体包装充填影响的模拟研究
Simulation Study on the Effect of Air Field of Powder De-static Ion on Powder Packing and Filling
投稿时间:2019-03-21  修订日期:2019-08-10
DOI:10.19554/j.cnki.1001-3563.2019.15.027
中文关键词: 粉体包装  气固耦合  静电消除
英文关键词: powder packaging  gas-solid coupling  electrostatic elimination
基金项目:国家重点研发计划(2018YFD0400704);河南省科技厅自然科学项目(182102110163)
作者单位
孟坤鹏 河南工业大学 机电工程学院郑州 450001 
李永祥 河南工业大学 机电工程学院郑州 450001 
徐雪萌 河南工业大学 机电工程学院郑州 450001 
唐静静 河南工业大学 机电工程学院郑州 450001 
李飞翔 河南工业大学 机电工程学院郑州 450001 
陈静 河南工业大学 机电工程学院郑州 450001 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究外加离子风风场对粉体充填过程粉尘落袋的影响,探究离子风机应用于粉体除静电包装的可行性。方法 基于气固耦合机理,利用Fluent软件,使用k-ω湍流模型与离散相模型(DPM),模拟外加风场情况下粉体包装的粉尘落袋过程,分析离子风风速对不同粒径粉尘颗粒捕获率的影响。结果 模拟结果显示,在外加离子风风场风速≤0.4 m/s时,风场对粉尘颗粒捕获率影响较小,在风速为0.4~ 0.6 m/s时,对直径1~30 µm的粉尘颗粒的捕获率有明显的提升作用。结论 通过设置适当的离子风风速,外加风场不会加剧粉体充填过程中出现的扬尘,在粉体填充包装过程中使用离子风机消除静电是可 行的。
英文摘要:
      The work aims to study the effect of ionic wind field on dust bagging in powder filling process, and to explore the feasibility of ionic fan applied in powder electrostatic packaging. Based on the mechanism of gas-solid coupling, the dust bagging of powder packaging was simulated by the k-ω turbulence model and the discrete phase model (DPM) through Fluent software, and the effects of different ion wind speed on the capture rate of dust particles in different particle sizes were analyzed. The simulation results showed that when the wind speed of the applied ionic wind field was ≤0.4 m/s, the influence of the applied wind field on the dust particle capture rate was small. When the wind speed was in the range of 0.4 m/s-0.6 m/s, the capture rate of dust particle with particle diameter of 1 micron to 30 micron was obviously increased. Setting appropriate ion wind speed will not aggravate the dust in the powder filling. It is feasible to use ion blower to eliminate static electricity in the powder filling and packaging.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21373754位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号