文章摘要
焦诚.纸张抗透印性与印品阶调层次关系的研究[J].包装工程,2019,40(19):257-262.
JIAO Cheng.Relationship between Paper Print-through Resistance and Print Tone[J].Packaging Engineering,2019,40(19):257-262.
纸张抗透印性与印品阶调层次关系的研究
Relationship between Paper Print-through Resistance and Print Tone
投稿时间:2019-04-30  修订日期:2019-10-10
DOI:10.19554/j.cnki.1001-3563.2019.19.038
中文关键词: 抗透印性  不透明度  油墨吸收性  色差  阶调值
英文关键词: print-through resistance  opacity  ink absorbency  color difference  tone value
基金项目:
作者单位
焦诚 上海市印刷品质量监督检验站上海 200042 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 提出一种控制和预测印品透印质量的评价方法,为印品图文设计及选纸方面提供理论依据,达到经济化、高质量生产的目的。方法 选取5种不同的非涂布纸样,对其紧度、平滑度、油墨吸收性和不透明度指标进行检测,通过建立PTR模型来评价纸样的抗透印性。在这5种纸样印上CMYK阶调色块,即10%~100%(实地),利用色差法ΔELab来表征每一阶调的透印程度PTq,以ΔELab=3.5作为透印阈值,来建立纸样抗透印性与各阶调之间的关系。结果 从1#纸样到5#纸样的抗透印值PTR依次减小,CMYK在各阶调的透印值也基本呈现相同规律,PTR模型成立;依据透印阈值和每一纸样的线性公式得到相应的阶调值,计算各色的阶调均值,从1#到5#分别为134.15%(计算值),88.9%,51.95%,42.7%,36.15%,以此建立PTR与阶调值的关系曲线。结论 抗透印PTR值在70.5%以下的纸张,适印40%以下阶调的图像;PTR值从71.0%开始不断增大,纸张的适印阶调范围也随之扩大;当PTR值达到73.8%左右时,即使实地色块也不会干扰到背面的图文。
英文摘要:
      The work aims to establish an evaluation method for controlling and predicting the print-through quality of printed products to provide theoretical basis for image and text design and paper selection of printed products, and achieve the purpose of economic and high-quality production. Five different kinds of non-coated paper samples were selected to test their compactness, smoothness, ink absorbency and opacity. PTR model was established to evaluate the print-through resistance of paper samples. The five types of paper were printed with CMYK tone block, namely 10%~100% (solid area). The color difference method ΔELab was used to characterize the print-through degree PTq of each tone. With ΔELab=3.5 as the print-through threshold, the relationship between the print-through resistance of the paper and each tone was established. As a result, from 1# paper sample to 5# paper sample, their PTRs decreased successively, the print-through value of CMYK in each tone basically presented the same rule, and the PTR model was established. The corresponding tone values were obtained according to the print-through threshold and the linear formula of each paper sample to calculate the mean tone values of various colors from 1# to 5#, namely 134.15% (calculated value), 88.9%, 51.95%, 42.7% and 36.15%, so as to establish the relation curve between PTR and tone value. In conclusion, the paper with PTR value of less than 70.5% is printable with images whose tone is lower than 40%. PTR value from 71.0% begins to increase, and the printable tone range of the paper is also expanded. When PTR value reaches about 73.8%, even for the solid color block, the image and text on the back will not be interfered.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21374119位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号