文章摘要
朱洪雷,代慧,罗隆.基于自动包装码垛技术的码垛机器人研究[J].包装工程,2020,41(13):231-236.
ZHU Hong-lei,DAI hui,LUO Long.Palletizing Robot Based on Automatic Packaging Palletizing Technology[J].Packaging Engineering,2020,41(13):231-236.
基于自动包装码垛技术的码垛机器人研究
Palletizing Robot Based on Automatic Packaging Palletizing Technology
投稿时间:2019-08-21  修订日期:2020-07-10
DOI:10.19554/j.cnki.1001-3563.2020.13.033
中文关键词: 工业码垛机器人  Lagrange方程  动力学仿真分析
英文关键词: industrial palletizing robot  Lagrange equation  dynamic simulation analysis
基金项目:广东省教育厅2017年重点平台及科研项目(2017GKTSCX048)
作者单位
朱洪雷 1.广州工程技术职业学院广州 510925 
代慧 2.广州番禺职业技术学院广州 511483 
罗隆 1.广州工程技术职业学院广州 510925 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了更全面地了解码垛机器人的使用性能,使其更好地应用于工程实践中,对其动力学进行理论及仿真分析。方法 采用第2类Lagrange方程对工业码垛机器人进行动力学方程计算,并运用ADAMS软件建立工业码垛机器人虚拟样机模型,考虑负载及关节转动时的摩擦,依照码垛机器人的循环工作流程进行仿真分析。结果 得出了码垛机器人的动力学方程组,码垛机器人的动力学方程与机器人的负载、部件的结构质量、运动时的加速度等具有正相关关系。仿真得到了机器人工作过程中各个关节的受力曲线图,各关节所需驱动力及力矩随着负载的增加及末端执行器的位置变化而不断增加和变化。结论 仿真结果验证了动力学理论分析的正确性,为工业码垛机器人的驱动部件的选型及控制系统的设计提供了有效的理论依据,为工业码垛机器人大范围走向工程应用实践提供了有力的技术支持。
英文摘要:
      The work aims to fully understand the performance of palletizing robot, make it better applied in the engi-neering practice, and carry out the theoretical and simulation analysis on its dynamics. The second Lagrange equation was used for the dynamic equation of industrial palletizing robot, and the ADAMS software was used to establish the virtual prototype model of industrial palletizing robot. Considering the friction of load and joint rotation, the simulation analysis was carried out according to the cyclic workflow of the palletizing robot. Dynamic equations of the palletizing robot were obtained and had positive correlation with the load of the robot, the structural mass of the parts and the acceleration during the movement. The stress curves of each joint in the working process of the robot were obtained by simulation, and the driving forces and torques required for each joint increased and varied with the increase in the load and the changing position of the end-effector. The simulation results verify the correctness of the theoretical dynamic analysis, providing an effective theoretical basis for the drive components selection of industrial palletizing robot, and a strong technical support for the industrial palletizing robot to move towards the engineering application in a large scale.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21087578位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号