文章摘要
黄英杰,薛莹莹,汪聃.加载速率对点阵铝力学行为及吸能特性的影响[J].包装工程,2020,41(15):64-69.
HUANG Ying-jie,XUE Ying-ying,WANG Dan.Effects of Loading Rate on the Mechanical Behavior and Energy Absorption of Al Lattice Truss[J].Packaging Engineering,2020,41(15):64-69.
加载速率对点阵铝力学行为及吸能特性的影响
Effects of Loading Rate on the Mechanical Behavior and Energy Absorption of Al Lattice Truss
投稿时间:2019-12-19  修订日期:2020-08-10
DOI:10.19554/j.cnki.1001-3563.2020.15.010
中文关键词: 点阵铝  加载速率  屈服强度  吸能特性
英文关键词: Al lattice truss  loading rate  yield strength  energy absorption
基金项目:陕西省自然科学基金(2019JQ-833);陕西省教育厅专项科研计划(19JQ0974);延安大学博士科研启动项目(YDBD2018-21)
作者单位
黄英杰 1.安阳师范学院 物理与电气工程学院河南 安阳 455000 
薛莹莹 2.烟台大学 机电汽车工程学院山东 烟台 264005 
汪聃 3.延安大学 物理与电子信息学院陕西 延安 716000 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究基体材料和加载速率对点阵铝力学性能和吸能特性的影响规律。方法 针对工业纯铝、6063铝合金为基体的点阵铝在3种不同的加载速率下进行压缩力学试验。结果 加载速率从2 mm/min增加到250 mm/min时,点阵纯铝的屈服强度增加了2 MPa,点阵6063铝合金的屈服强度增加了7.6 MPa;加载速率从250 mm/min增加到500 mm/min时,点阵纯铝的屈服强度变化不大,而点阵6063铝合金的屈服强度增加了8.2 MPa;当加载速率一定时,点阵6063铝合金的屈服强度要大于点阵纯铝。结论 点阵6063铝合金的力学性能和单位体积吸能随着加载速率的增大而增大,并且点阵6063铝合金的力学性能和吸能特性要大于点阵纯铝。
英文摘要:
      The work aims to study the effects of basis materials and loading rate on the mechanical behavior and energy absorption of Al lattice truss. The compressive mechanics of Al lattice truss with industrial pure aluminum and 6063 aluminum alloys as basis materials were tested at three different loading rates. When the loading rate increased from 2 mm/min to 250 mm/min, the yield strength of the pure Al lattice truss increased by 2 MPa, and the yield strength of the 6063 aluminum alloys based lattice truss increased by 7.6 MPa. When the loading rate increased from 250 mm/min to 500 mm/min, the yield strength of the pure Al lattice truss remained constant; however, the yield strength of the 6063 aluminum alloys based lattice truss increased by 8.2 MPa. At the same loading rate, the yield strength of 6063 aluminum alloys based lattice truss was higher than that of pure Al lattice truss. The mechanical properties and energy absorption per unit volume of 6063 aluminum alloys based lattice truss increase with the increase of loading rate, and the mechanical properties and energy absorption of 6063 aluminum alloys based lattice truss are much higher than those of pure Al lattice truss.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21380296位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号