文章摘要
杨楠,李兵祖,潘帅,袁舜,袁霞.基于SolidWorks和Ansys的20 ft集装箱石材运输架设计[J].包装工程,2021,42(11):150-156.
YANG Nan,LI Bing-zu,PAN Shuai,YUAN Shun,YUAN Xia.Design of Stone Transport Rack Suitable for 20 ft Container Based on SolidWorks and Ansys[J].Packaging Engineering,2021,42(11):150-156.
基于SolidWorks和Ansys的20 ft集装箱石材运输架设计
Design of Stone Transport Rack Suitable for 20 ft Container Based on SolidWorks and Ansys
投稿时间:2020-09-28  
DOI:10.19554/j.cnki.1001-3563.2021.11.022
中文关键词: 20 ft集装箱  石材运输架  SolidWorks  Ansys  有限元分析
英文关键词: 20 ft container  stone transport rack  SolidWorks  Ansys  finite element analysis
基金项目:国家重点研发计划(2016YFB1200100)
作者单位
杨楠 中国铁路兰州局集团有限公司科信部兰州 730000 
李兵祖 中国铁路兰州局集团有限公司科研技术监督所兰州 730000 
潘帅 九江职业技术学院江西 九江332007 
袁舜 兰州交通大学 铁道部货物装载加固研究与咨询中心兰州 730070 
袁霞 兰州交通大学 铁道部货物装载加固研究与咨询中心兰州 730070 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为解决石材在长距离运输过程中,存在不易加固、破损率高、运输成本昂贵等问题,设计一款安全、轻便、可循环使用、可拆解、便于回送的20 ft(1 ft=0.3048 m)集装箱石材运输架。方法 首先按照《铁路货物装载加固规则》要求,计算作用在石材上的各种力,确定装载加固方案,再根据《钢结构设计规范》及20 ft通用集装箱内部结构确定石材运输架的材料与规格,然后采用SolidWorks对运输架进行三维建模,利用Ansys对模型进行有限元分析。结果 分析得出,石材运输架最薄弱部分应力分别为155.36,99.56,99.48,70.87,343.75 MPa,位移变形量分别为0.54,1.95,0.60,0.01,0.10 mm,均符合规定。结论 20 ft集装箱石材运输架运输效率高,可实现“门到门”运输,应用前景良好,对当下石材运输发展有较大影响。
英文摘要:
      In order to solve the problems of difficult reinforcement, high damage rate and high transportation cost during the long distance transportation of stone, and to design a new type of safe, light, recyclable, disassembled, and easy to return stone transportation rack. First, various forces acting on the stone is calculated in accordance with the requirements of the "Railway Freight Loading Reinforcement Rules" to determine the loading and reinforcement scheme, and then the material and specifications of the stone transport rack is determined according to the "Standard for Design of Steel Structures" and the internal structure of the 20 ft general container. SolidWorks is used to carry out three-dimensional modeling of the transportation rack, and Ansys is used to perform finite element analysis on the model. The result analysis shows that the stress of the weakest parts of the stone transport rack are 155.36, 99.56, 99.48, 70.87, 343.75 MPa, and the displacements are 0.54, 1.95, 0.60, 0.01, 0.10 mm. The stone transportation rack has high transportation efficiency and can realize "Door-to-Door" transportation, and has good application prospects, which has great impact on the current development of stone transportation.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21140165位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号