文章摘要
李婧.凹版印刷多色套准控制系统设计[J].包装工程,2021,42(19):277-281.
LI Jing.Design of Multi-Color Alignment Control System for Intaglio Printing[J].Packaging Engineering,2021,42(19):277-281.
凹版印刷多色套准控制系统设计
Design of Multi-Color Alignment Control System for Intaglio Printing
投稿时间:2021-02-28  
DOI:10.19554/j.cnki.1001-3563.2021.19.036
中文关键词: 多色套准  凹版印刷  模糊控制  图像处理
英文关键词: multi-color alignment  intaglio printing  fuzzy control  image processing
基金项目:
作者单位
李婧 河南工学院河南 新乡 453000 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为减小凹版印刷过程中套印误差、提高印刷质量。方法 分析凹版印刷产生误差的主要原因,基于模糊控制设计一种多色套准控制系统。论述基于图像处理的套印误差检测原理。根据多色套印的生产需求,设计一种模糊比例-积分-微分(PID)控制器。利用模糊推理,该控制器可对PID参数进行自适应调整,进而实现高精度、高速度印刷。最后,采用数字信号处理器(DSP)搭建控制系统架构,并进行实验研究。结果 实验结果表明,套印偏差最大值只有0.018 mm,远小于行业标准;套印偏差检测速度明显大于印刷速度,可确保印刷过程的实时性。结论 所述多色套准控制系统具有精度高、速度高等特点,可满足印刷、包装等相关行业的要求。
英文摘要:
      In order to reduce overprinter error and improve printing quality in intaglio printing process, the main causes of errors in intaglio printing ware analyzed and a multi-color alignment control system was designed based on fuzzy control. The principle of overprinter error detection based on image processing was discussed. According to the production demand of multi-color overprinter, a fuzzy proportional-integral-differential (PID) controller was designed. By using fuzzy reasoning, the PID parameters couble be adjusted adaptively, then a high precision and speed printing couble also be realized. Finally, the architecture of the control system was built by digital signal processor (DSP) and the experimental research was carried out. The experimental results show that the maximum deviation of over-printer is only 0.018 mm, which is far less than the industry standard. The detection speed of overprint deviation is obviously higher than that of printing, which can ensure the real-time performance of printing process. The multi-color registration control system based on DSP has the characteristics of high precision and high speed, which can meet the requirements of printing, packaging and other related industries.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21307580位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号