文章摘要
朱天天,邓援超,夏万.利用连杆机构实现纸盒折边装置铲刀轨迹的优化设计[J].包装工程,2021,42(23):232-237.
ZHU Tian-tian,DENG Yuan-chao,XIA Wan.Optimal Design of Cutter Track of Paper Box Edge Folding Device by Connecting Rod Mechanism[J].Packaging Engineering,2021,42(23):232-237.
利用连杆机构实现纸盒折边装置铲刀轨迹的优化设计
Optimal Design of Cutter Track of Paper Box Edge Folding Device by Connecting Rod Mechanism
投稿时间:2021-01-15  
DOI:10.19554/j.cnki.1001-3563.2021.23.033
中文关键词: 连杆机构  折边装置  优化设计  Adams  Matlab
英文关键词: connecting rod mechanism  edge folding device  optimization design  Adams  Matlab
基金项目:
作者单位
朱天天 湖北工业大学 机械工程学院武汉 430068 
邓援超 湖北工业大学 机械工程学院武汉 430068 
夏万 湖北工业大学 机械工程学院武汉 430068 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 在内盒成型机上完成一种折边动作,使某种特定纸盒的内盒围条与面纸能够精准贴合。 方法 通过研究连杆机构式折边装置的运动特点,根据特点分析优化设计的方法,以预期轨迹和实际轨迹之间均方根作为优化的目标函数,运用Matlab搜索在限定条件下的最优尺寸。结果 在Adams中建立相应模型进行运动仿真,得到仿真连杆运动轨迹曲线。最后通过将实际需要的设计轨迹和虚拟仿真的轨迹进行对比,发现虚拟轨迹曲线与设计的曲线最大误差为0.36 mm。结论 符合实际生产中对面纸折边的实际需要,验证了优化设计结果的正确性,对纸盒成型行业提供了一定的参考性。
英文摘要:
      The work aims to complete an edge folding action on the inner box forming machine, to fit the inner box strip of certain carton to the surface paper accurately. Through the study on motion characteristics of the edge folding device with connecting rod mechanism, the designed method was analyzed and optimized. The root mean square between the expected trajectory and the actual trajectory was taken as the objective function of the optimization, and the optimal size under the limited conditions was searched by the Matlab. The corresponding model was established in the Adams to simulate the motion trajectory curve of the simulated connecting rod. Finally, through the comparison between the actual design trajectory and the virtual simulation trajectory, it was found that the maximum error between the virtual trajectory curve and the designed curve was 0.36 mm. The work is in line with the actual needs of paper folding in actual production, verifies the correctness of the optimization design results, and provides a certain reference for the carton forming industry.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21104335位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号