文章摘要
熊治雨,熊伟,林茂青,李虹,林新华,王鑫,关平,彭晓华.环烯烃共聚物对聚丙烯五层共挤出软管阻隔性能的影响[J].包装工程,2023,44(5):51-56.
XIONG Zhi-yu,XIONG Wei,LIN Mao-qing,LI Hong,LIN Xin-hua,WANG Xin,GUAN Ping,PENG Xiao-hua.Effects of Cyclic Olefin Copolymer on Barrier Performance of Polypropylene Five-layer Co-extrusion Hose[J].Packaging Engineering,2023,44(5):51-56.
环烯烃共聚物对聚丙烯五层共挤出软管阻隔性能的影响
Effects of Cyclic Olefin Copolymer on Barrier Performance of Polypropylene Five-layer Co-extrusion Hose
  
DOI:10.19554/j.cnki.1001-3563.2023.05.007
中文关键词: 环烯烃共聚物  聚丙烯  五层共挤出软管  阻隔性
英文关键词: cyclic olefin copolymer  polypropylene  five layers of co-extruded hose  barrier
基金项目:
作者单位
熊治雨 深圳市力合科创股份有限公司广东 深圳 518057
华南理工大学 材料科学与工程学院广州 510641 
熊伟 深圳市力合科创股份有限公司广东 深圳 518057 
林茂青 深圳市力合科创股份有限公司广东 深圳 518057 
李虹 深圳市八六三新材料技术有限责任公司广东 深圳 518117 
林新华 深圳市八六三新材料技术有限责任公司广东 深圳 518117 
王鑫 深圳市八六三新材料技术有限责任公司广东 深圳 518117 
关平 深圳市力合科创股份有限公司广东 深圳 518057 
彭晓华 深圳市力合科创股份有限公司广东 深圳 518057 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 在聚丙烯(PP)五层共挤出软管的外层中引入一定质量分数环烯烃共聚物(COC)材料,研究其对软管阻隔性能的影响。方法 将不同质量分数的COC与PP共混造粒,对共混物进行熔融行为分析,并测试软管的阻氧与阻水性能,共混材料的拉伸强度、弯曲模量、缺口冲击强度等。结果 随着COC添加量的增加,软管管身的氧气透过速率与水蒸气透过速率降低。当COC质量分数为20%时,氧气透过率低至3.3 cm3/(d.m2),水蒸气透过率为0.6 g/(d.m2),此时其他性能也能实现较好的平衡。结论 在PP五层共挤出软管的外层中引入COC可以有效地提升软管阻水与阻氧性能。
英文摘要:
      The work aims to introduce a certain proportion of cyclic olefin copolymer (COC) material into the outer layer of polypropylene (PP) five-layer co-extrusion hoses, and study its effect on the barrier performance of the hoses. The melting behavior of the COC/PP blends of different proportions was analyzed. The oxygen and water resistance properties, tensile strength, bending modulus, notched impact strength of the blends were also tested. With the increase of COC, the permeability of oxygen and water vapor decreased. When the COC dosage was 20 wt%, the oxygen permeability was as low as 3.3 cm3/(d.m)2, and the water vapor permeability was 0.6 g/(d.m)2. At the meantime, the other properties also achieved a good balance. It is concluded that the presence of COC can effectively improve the water and oxygen resistance performance of the PP five-layer co-extrusion hoses.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21377785位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号