文章摘要
张凯,阴文博,秦晨妮,杨毓洁,刘杨,赵辉.双分子层液膜法制备纤维素水基泡沫及其稳定性的研究[J].包装工程,2023,44(7):54-62.
ZHANG Kai,YIN Wen-bo,QIN Chen-ni,YANG Yu-jie,LIU Yang,ZHAO Hui.Cellulose-based Aqueous Foam by Bilayer Liquid Films and Its Stability[J].Packaging Engineering,2023,44(7):54-62.
双分子层液膜法制备纤维素水基泡沫及其稳定性的研究
Cellulose-based Aqueous Foam by Bilayer Liquid Films and Its Stability
  
DOI:10.19554/j.cnki.1001-3563.2023.07.007
中文关键词: 纤维素水基湿泡沫  蔗渣原纤浆  双分子层液膜  泡沫成形法
英文关键词: cellulose-based aqueous foam  bagasse fibrillated fiber  bilayer liquid film  foam forming method
基金项目:国家自然科学基金(22068004);广西自然科学基金项目(2020GXNSFBA159023)
作者单位
张凯 广西大学 轻工与食品工程学院南宁 530004 
阴文博 广西大学 轻工与食品工程学院南宁 530004 
秦晨妮 广西大学 轻工与食品工程学院南宁 530004 
杨毓洁 广西大学 轻工与食品工程学院南宁 530004 
刘杨 广西大学 轻工与食品工程学院南宁 530004
广西清洁化制浆造纸与污染控制重点实验室南宁 530004 
赵辉 广西大学 轻工与食品工程学院南宁 530004
广西清洁化制浆造纸与污染控制重点实验室南宁 530004 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 解决纤维素基泡沫制备过程烦琐、湿泡沫的稳定性差的问题。方法 通过单因素试验,考察了十四醇(TDA)、阿拉伯胶(GAC)质量浓度对双膜气泡的稳定性的影响,在此基础上,采用泡沫成形法制备纤维素水基湿泡沫,通过探究合适的十二烷基硫酸钠(SDS)质量浓度、蔗渣原纤浆质量浓度和搅拌速率进一步提高纤维素水基湿泡沫的稳定性。结果 TDA和GAC质量浓度分别为0.015 g/mL和0.010 g/mL时是制备双膜气泡的最佳条件。当SDS质量浓度为0.015 g/mL、蔗渣原纤浆(BF)质量分数为1.8%、搅拌速率为2 000 r/min时,纤维素水基湿泡沫稳定性达到最佳。结论 构建了稳定的纤维素水基泡沫,为纤维素基泡沫提供了一种简单、可行的方法。
英文摘要:
      The works aims to solve the problem of complicated preparation process and poor stability of aqueous foam. By single factor test, the effects of concentrations of tetradecyl alcohol (TDA) and gum arabic (GAC) on the stability of double film bubbles were investigated. On this basis, cellulose-based aqueous foam was prepared by foam forming method. The stability of cellulose-based aqueous foam was further improved by exploring appropriate concentration of sodium dodecyl sulfate (SDS), concentration of bagasse fibrillated fiber and stirring rate. The result was that TDA and GAC concentrations of 0.015 g/mL and 0.010 g/mL were the best conditions for preparation of double film bubbles. When the SDS concentration was 0.015 g/mL, the bagasse fibrillated fiber (BF) concentration was 1.8 wt.%, and the stirring rate was 2 000 r/min, the cellulose-based aqueous foam achieved the best stability. The stable cellulose-based aqueous foam is constructed, which provides a simple and feasible method for cellulose-based foam.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21279625位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号