文章摘要
王莹.端羧基液体丁腈橡胶改性海因环氧树脂性能研究[J].包装工程,2023,44(13):43-48.
WANG Ying.Properties of Hydantoin Epoxy Resin Modified by Carboxyl Terminated Liquid Nitrile Rubber[J].Packaging Engineering,2023,44(13):43-48.
端羧基液体丁腈橡胶改性海因环氧树脂性能研究
Properties of Hydantoin Epoxy Resin Modified by Carboxyl Terminated Liquid Nitrile Rubber
  
DOI:10.19554/j.cnki.1001-3563.2023.13.006
中文关键词: 端羧基液体丁腈橡胶  海因环氧树脂  增韧  热性能
英文关键词: carboxyl terminated liquid nitrile rubber  hydantoin epoxy resin  toughening  thermal properties
基金项目:博士科研启动项目(2019DS089)
作者单位
王莹 哈尔滨商业大学 轻工学院哈尔滨 150028 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 采用端羧基液体丁腈橡胶(CTBN)对海因环氧树脂进行增韧改性。方法 通过热熔法将不同份数的CTBN添加到海因环氧树脂中,以4,4'–二氨基二苯甲烷为固化剂制备了改性环氧树脂,通过固化动力学研究确定了其固化工艺,考察CTBN用量对改性树脂体系的反应活性、力学性能、热性能以及断面微观形貌的影响。结果 随着CTBN的加入,改性树脂的固化放热峰向高温方向偏移。CTBN可显著提高树脂体系的断裂伸长率和冲击强度,其热性能基本保持不变。改性树脂的断面呈现两相“海岛”结构。结论 CTBN对海因环氧树脂有明显的增韧作用,制备的改性树脂体系可用于金属防腐涂料和胶黏剂等材料。
英文摘要:
      The work aims to improve the toughness of hydantoin epoxy resin by incorporating carboxyl-terminated liquid nitrile rubber (CTBN). CTBN of different amounts were added to the hydantoin epoxy resin through the melt-blending method. The modified epoxy resin was prepared with 4,4'-diaminodiphenylmethane as the curing agent. The curing process was determined by studying the curing kinetics. The effects of CTBN content on the reaction activity, mechanical properties, thermal properties, and cross-sectional microstructure of the modified resin system were investigated in detail. The results showed that the addition of CTBN shifted the curing exothermic peak of the modified resin towards the direction of higher temperature, and CTBN significantly improved the fracture elongation and impact strength of the resin system, while the thermal properties remained relatively unchanged. The cross-sectional microstructure of the modified resin exhibited a two-phase "island" structure. In conclusion, CTBN has a significant toughening effect on hydantoin epoxy resin, and the resulting modified resin system can be used for metal corrosion-resistant coatings and adhesives.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21676085位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号