文章摘要
唐荣,刘长军,廖崇蔚,温浩宇,吴波,王传龙.S波段变频微波方腔干燥PET切片的研究[J].包装工程,2024,45(5):1-7.
TANG Rong,LIU Changjun,LIAO Chongwei,WEN Haoyu,WU Bo,WANG Chuanlong.S-band Frequency-tuning Microwave Drying of PET Materials in a Cubic Cavity[J].Packaging Engineering,2024,45(5):1-7.
S波段变频微波方腔干燥PET切片的研究
S-band Frequency-tuning Microwave Drying of PET Materials in a Cubic Cavity
投稿时间:2024-01-21  
DOI:10.19554/j.cnki.1001-3563.2024.05.001
中文关键词: 聚对苯二甲酸乙二醇酯  深度干燥  微波干燥  热失控  水分脱除  含水率
英文关键词: polyethylene terephthalate  deep drying  microwave drying  thermal runaway  water removal  water content
基金项目:国家自然科学基金区域创新发展联合基金重点支持项目(U22A2015)
作者单位
唐荣 四川大学成都 610064
宜宾四川大学产业技术研究院四川 宜宾 644000 
刘长军 四川大学成都 610064
宜宾四川大学产业技术研究院四川 宜宾 644000 
廖崇蔚 四川大学成都 610064
宜宾四川大学产业技术研究院四川 宜宾 644000 
温浩宇 四川省宜宾普拉斯包装材料有限公司四川 宜宾 644007 
吴波 四川省宜宾普拉斯包装材料有限公司四川 宜宾 644007 
王传龙 四川省宜宾普拉斯包装材料有限公司四川 宜宾 644007 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 针对聚对苯二甲酸乙二醇酯(PET)材料传统干燥方式能耗高、效率低等不足,运用微波干燥材料具有速度快、效率高、易于控制的特点,研究微波深度干燥PET技术并研制实验装置。方法 提出微波变频和变功率加热干燥技术,通过主动调整频率改善微波均匀性,结合微波变功率技术,控制PET材料温度在170~180 ℃,提升PET材料温度均匀性,并防止“热失控”现象的发生。结果 当干燥时间为2 h时,实现了PET深度干燥,能耗率为1.03 kW.h/kg,含水率降低至0.01%以下,达到了后续包装材料注塑加工的要求。结论 微波变频变功率加热技术适用于低含水率PET的深度干燥,比传统干燥方式能耗低并且时间短。
英文摘要:
      Aiming at the shortcomings of the traditional drying method of polyethylene terephthalate (PET) materials such as high energy consumption and low efficiency, the work aims to study the technology of deep drying of PET by microwave and develop the experimental device based on the characteristics of high speed, high efficiency and easy control of drying materials by microwave. The microwave frequency-tuning and variable power drying technology was proposed, and the microwave uniformity was improved by actively adjusting the frequency. Combined with microwave variable power technology, the temperature of PET material was controlled at 170-180 °C, the temperature uniformity of PET material was improved and the occurrence of "thermal runaway" was prevented. When the drying time was 2 h, the deep drying of PET was realized, the energy consumption rate was 1.03 kW.h/kg, and the moisture content was reduced to less than 0.01%, which met the requirements of subsequent injection molding processing of packaging materials. Microwave frequency-tuning and variable power technology is suitable for deep drying of PET materials, which has advantages over traditional drying methods in terms of time and energy consumption.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20984961位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号