文章摘要
张金,常亚宁,高卫军,卫剑,梁志军,杨光露.基于CFD的YJ17卷烟机风室流场分析与优化设计[J].包装工程,2024,45(5):164-172.
ZHANG Jin,CHANG Yaning,GAO Weijun,WEI Jian,LIANG Zhijun,YANG Guanglu.Analysis and Optimization Design of YJ17 Cigarette Machine Air Chamber Flow Field Based on CFD[J].Packaging Engineering,2024,45(5):164-172.
基于CFD的YJ17卷烟机风室流场分析与优化设计
Analysis and Optimization Design of YJ17 Cigarette Machine Air Chamber Flow Field Based on CFD
投稿时间:2023-08-22  
DOI:10.19554/j.cnki.1001-3563.2024.05.020
中文关键词: 供丝系统  流体仿真  正交实验  风室  结构优化
英文关键词: cigarette supply system  fluid simulation  orthogonal experiment  air chamber  structural optimization
基金项目:河南中烟工业有限责任公司科技项目(ZW201834)
作者单位
张金 河南中烟工业有限责任公司安阳卷烟厂河南 安阳 455000 
常亚宁 河南中烟工业有限责任公司安阳卷烟厂河南 安阳 455000 
高卫军 河南中烟工业有限责任公司安阳卷烟厂河南 安阳 455000 
卫剑 河南中烟工业有限责任公司安阳卷烟厂河南 安阳 455000 
梁志军 河南中烟工业有限责任公司安阳卷烟厂河南 安阳 455000 
杨光露 河南中烟工业有限责任公司南阳卷烟厂河南 南阳 473000 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 针对ZJ17卷接机YJ17供丝系统中烟丝堵塞、竹节烟和烟支标偏大的现象进行改进。方法 采用流体仿真分析软件Solidworks Simulation模拟分析、正交实验及试验验证的方法,设计优化YJ17供丝系统的风室装置,通过模拟仿真不同正压风入口形状、数量、位置对设备运行效率、产品质量的影响,找到三者最优的参数组合。模拟分析发现,在正压风入口形状为圆形,正压风入口数量为3个,正压风入口距离气室边缘的距离为15 mm时,风室气流分布更均匀,同时烟丝在离开抛丝辊后受到的下吹风力最大,可使烟丝快速到达吸丝带。结果 气室经改进后烟丝堵塞次数降低了39.3%,SD值(20支烟支质量标偏)降低了25%,有效提升了设备的运行效率和卷烟产品的质量。结论 基于仿真及正交实验结果,优化了风速出风口位置和直径,气室的流场分析结果可为烟丝吸丝成型及风室结构优化提供一定技术支持。
英文摘要:
      The work aims to address the phenomenon of cigarette blockage, slub cigarette, and excessively large cigarette label in the YJ17 wire supply system of the ZJ17 cigarette machine. The method of the fluid simulation analysis software Solidworks Simulation, orthogonal experiments, and experimental verification was used to design and optimize the air chamber device of the YJ17 cigarette supply system. Through simulation of effect of different shapes, quantities, and positions of positive pressure air inlets on the operation efficiency and product quality of equipment, three optimal combinations were found. When the positive pressure air inlet shape was circular, with 3 positive pressure air inlets and a distance of 15 mm between the positive pressure air inlet and the edge of the air chamber, the air flow in the chamber was more uniform. When the cigarette left the throwing roller and was subject to the maximum and most uniform downward blowing force, the cigarette quickly reached the suction strip. After the improvement of the air chamber, the number of cigarette blockages decreased by 39.3%, and the SD value (weight deviation of 20 cigarettes) decreased by 25%, effectively improving the equipment operation efficiency and cigarette product quality. Based on simulation and orthogonal experimental results, optimizing the position and diameter of the air outlet and the flow field analysis results of the air chamber can provide certain technical support for the cigarette suction molding and the optimization of the air chamber structure.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20986971位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号