文章摘要
李志强,王杰,赵怡怡,王哲,刘迪.单晶硅片循环包装设计与可靠性分析[J].包装工程,2024,45(5):286-291.
LI Zhiqiang,WANG Jie,ZHAO Yiyi,WANG Zhe,LIU Di.Design and Reliability Analysis of Circular Packaging for Monocrystalline Silicon Wafer[J].Packaging Engineering,2024,45(5):286-291.
单晶硅片循环包装设计与可靠性分析
Design and Reliability Analysis of Circular Packaging for Monocrystalline Silicon Wafer
投稿时间:2023-08-28  
DOI:10.19554/j.cnki.1001-3563.2024.05.034
中文关键词: 单晶硅片  循环包装  跌落仿真  可靠性分析
英文关键词: monocrystalline silicon wafer  cyclic packaging  drop simulation  reliability analysis
基金项目:教育部“蓝火计划”(惠州)产学研联合创新资金项目(CXZJHZ201806)
作者单位
李志强 陕西科技大学 轻工科学与工程学院西安 710021
陕西科技大学 轻化工程国家级实验教学示范中心西安 710021 
王杰 陕西科技大学 轻工科学与工程学院西安 710021 
赵怡怡 陕西科技大学 轻工科学与工程学院西安 710021 
王哲 陕西科技大学 轻工科学与工程学院西安 710021 
刘迪 陕西科技大学 轻工科学与工程学院西安 710021 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 以某公司M10型单晶硅片为研究对象,基于缓冲包装六步法及4R1D原则设计安全经济的单晶硅片循环包装方案。方法 使用Creo软件建立3D模型,利用ANSYS LS-DYNA进行堆码跌落仿真,结合跌落试验结果验证包装的可靠性。结果 动态跌落仿真在角跌落工况下,跌落角产生最大应力为34.42 MPa,小于包装箱许用应力40 MPa;产品最大响应加速度为38.71g,发生在棱跌落工况,小于产品脆值50g。试验与仿真平均误差为8.30%,在450 mm跌落高度下。使用此循环包装方案,产品整体破损率降低了8.02%。结论 此循环包装的安全性、便利性和经济性优于现有一次性包装的。
英文摘要:
      The work aims to design a safe and economical circular packaging scheme for monocrystalline silicon wafer based on the six-step buffer packaging and 4R1D principle with M10 monocrystalline silicon wafer of a company as the research object. A 3D model was established by Creo software, and the stacking drop was simulated by ANSYS LS-DYNA. The packaging reliability was verified by the drop test results. The results showed that the maximum stress produced by the falling angle was 34.42 MPa, which was less than the allowable stress of the packing box of 40 MPa. The maximum response acceleration of the product was 38.71g, which was less than the brittle value of the product of 50g. The average error between experiment and simulation was 8.30%. Under the drop height of 450 mm, the overall breakage rate of the product was reduced by 8.02% by using this recycling packaging scheme. To sum up, the safety, convenience and economy of this recycling package are superior to the existing disposable packaging.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20985459位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号