文章摘要
李志平,吴雄杰,汪佳,江小平.塑料复合膜、袋溶剂残留量不确定度评估[J].包装工程,,():.
LI Zhi-ping,WU Xiong-jie,WANG Jia,JIANG Xiao-ping.Evaluation on Uncertainty of Determination of Solvent Residues in Plastic Laminated Films and Pouches[J].Packaging Engineering,,():.
塑料复合膜、袋溶剂残留量不确定度评估
Evaluation on Uncertainty of Determination of Solvent Residues in Plastic Laminated Films and Pouches
投稿时间:2016-01-15  
DOI:
中文关键词: 包装用塑料复合膜、袋  溶剂残留  不确定度  拟合校准工作曲线
英文关键词: plastic laminated films and pouches for packaging  solvent residues  uncertainty  fitting regression calibration line
基金项目:
作者单位
李志平 安徽省包装印刷产品质量监督检验中心桐城 231400 
吴雄杰 1.安徽省包装印刷产品质量监督检验中心桐城 2314002.国家高分子材料质量监督检验中心桐城 231400 
汪佳 安徽大学合肥 230601 
江小平 1.安徽省包装印刷产品质量监督检验中心桐城 2314002.国家高分子材料质量监督检验中心桐城 231400 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为提高包装用塑料复合膜、袋中溶剂残留的检测水平,建立溶剂残留测定结果的不确定度评定方法模型。方法 以GB/T 10004—2008《包装用塑料复合膜、袋 干法复合、挤出复合》中溶剂残留的检测方法为基础,参考相关标准和文献系统分析该法测量结果的不确定度来源,并对不确定度各个分量进行评估和合成。结果 样品中溶剂残留总量的测定结果可表示为(22.40+1.421) mg/m2,k=2,P=95%。样品中苯系物残留量的测定结果可表示为(1.748+0.090 06)mg/m2,k=2,P=95%。最小二乘法得到的拟合校准工作曲线是溶剂残留结果测量不确定度的主要来源。结论 溶剂残留测量结果的不确定度可作为表征测量结果准确度的指标之一。
英文摘要:
      The aim of this work was to study the model of the uncertainty evaluation method of solvent residues in laminated films and pouches in order to raise the level of solvent residues test. Solvent residues were tested according to the standard GB/T 10004—2008 "Plastic laminated films and pouches for packaging-dry lamination and extrusion lamination", The sources of uncertainty of the test result were evaluated and quantified according to some relevant standard and document. The result of the total solvent residues of sample in laminated films and pouches was expressed as: (22.40+1.421)mg/m2, k=2, P=95%.The result of the benzene series solvent residues of sample in laminated films and pouches was expressed as: (1.748+0.090 06)mg/m2, k=2, P=95%.The result showed that the uncertainty by fitting regression calibration line had the largest affect to the determination result. The evaluation results not only can be used to be the indicator of test result in accuracy.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22597781位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号