文章摘要
姚湘,袁开祎,余祥杰.产品机能转化需求层级的设计方法研究[J].包装工程,2018,39(18):196-202.
产品机能转化需求层级的设计方法研究
Design Method for Product Enginery Transformed into Hierarchy of Needs
投稿时间:2018-06-27  修订日期:2018-09-20
DOI:10.19554/j.cnki.1001-3563.2018.18.037
中文关键词: 产品设计  机能分析  次机能  Kano模型  用户需求
英文关键词: product design  enginery analysis  subordination-enginery  Kano Model  user needs
基金项目:国家自然科学基金资助项目(51505405);湖南省机械智能产品工业设计中心开放课题(KH010860102);湘潭大学博士科研启动基金(KZ08039)
作者单位
姚湘 湘潭大学 机械工程学院湘潭 411105 
袁开祎 湘潭大学 机械工程学院湘潭 411105 
余祥杰 湘潭大学 机械工程学院湘潭 411105 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 用一种基于产品机能分析及Kano模型的设计方法来优化产品设计与开发流程。方法 通过机能分析,得到产品各机能及次机能,并将次机能转换成为用户需求,通过Kano模型对用户需求进行分类,得到不同层级的用户需求后转化成不同层级的设计特征,以无线路由器的设计为案例,探讨本方法在产品设计流程中的有效性。结论 该方法能够直观地体现用户对产品不同层级的需求,有利于优化产品设计流程,制定机能设计规范,明确设计目标,提高用户满意度。
英文摘要:
      The work aims to optimize the product design and development process with a design method based on the product enginery analysis and Kano model. Through the enginery analysis, the product enginery and subordination-enginery were obtained, and the subordination-enginery was converted into the user needs. The user needs were classified based on Kano model. Such needs at different levels were obtained and then transformed into different levels of design features. Taking the design of wireless router as a case, the effectiveness of the proposed method in the product design flow was discussed. The proposed method can intuitively reflect the user's demand for different levels of products, which helps optimize the product design flow, formulate design specifications of enginery, specify design goals, and improve customer satisfaction.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护

您是第19609965位访问者    渝ICP备15012534号-4

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023—68792836传真:023—68792396 Email: designartj@126.com

    

  
 

渝公网安备 50010702501717号