文章摘要
易青,王琪,魏先福,黄蓓青.单体对 UV-LED 喷墨油墨性能影响的研究[J].包装工程,2014,35(7):127-132.
YI Qing,WANG Qi,WEI Xian-fu,HUANG Bei-qing.Effect of Monomer on UV-LED Inkjet Ink Performance[J].Packaging Engineering,2014,35(7):127-132.
单体对 UV-LED 喷墨油墨性能影响的研究
Effect of Monomer on UV-LED Inkjet Ink Performance
投稿时间:2013-08-25  修订日期:2014-04-01
DOI:
中文关键词: 单体  UV-LED 喷墨油墨  性能  配方实验
英文关键词: monomer  UV-LED inkjet ink  performance  formulation experiment
基金项目:
作者单位
易青 南京林业大学 江苏省制浆造纸科学与技术重点实验室, 南京 210037
北京印刷学院, 北京 102600 
王琪 南京林业大学 江苏省制浆造纸科学与技术重点实验室, 南京 210037 
魏先福 北京印刷学院, 北京 102600 
黄蓓青 北京印刷学院, 北京 102600 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究单体对 UV-LED 喷墨油墨性能的影响并改善油墨性能。 方法 选用不同单体分别制备油墨样品,测试色浆的分散性及油墨的黏度、表面张力、双键转换率、柔韧性和附着力,并采用配方实验方法设计复合单体配方,得到油墨综合性能最佳时混合单体的比例。 结果 色浆配方中复合单体最优质量比为 mNPGDA: mTMPTA= 0 . 54 : 0 . 46 时,色浆分散性最优;油墨配方中复合单体的最优质量比为 mTPGDA: mTMPTA= 0 . 61 : 0 . 39 时,油墨综合性能最优。 结论 单体对 UV-LED 喷墨油墨的分散性及固化速度有显著影响,对油墨固化后成膜性能影响也较大。
英文摘要:
      Objective To investigate the impact of monomer on UV-LED inkjet ink performance and improve ink performance. Methods Different monomers were used to prepare ink samples, and the dispersivity, viscosity, surface tension, curing rate, flexibility and adhesion of ink were tested. In the end, the optimal ratio of co-monomers was achieved by formulation experiment to obtain the best overall performance. Results The ink paste showed the optimal dispersivity when the mass ratio of co-monomers was mNPGDA: mTMPTA = 0. 54 : 0. 46, and the ink showed the optimal overall performance when the mass ratio of co -monomers was mTPGDA : mTMPTA = 0. 61 : 0. 39. Conclusion Monomer had a significant influence on the dispersion and curing rate of UV-LED inkjet ink, and also had a great impact on ink film-forming properties after UV-LED curing.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护

您是第23563994位访问者    渝ICP备15012534号-4

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652传真:023—68792396 Email: designartj@126.com

    

  
 

渝公网安备 50010702501717号