融合技术接受模型的适老化呼吸康复产品设计研究

王翊璋; 叶亮; 耿丽

doi:10.19554/j.cnki.1001-3563.2026.16.029

PDF(1059 KB)

包装工程（设计栏目） ›› 2026, Vol. 47 ›› Issue (16) : 341-350. DOI: 10.19554/j.cnki.1001-3563.2026.16.029

设计研讨

融合技术接受模型的适老化呼吸康复产品设计研究

王翊璋^1,*, 叶亮², 耿丽³

作者信息 +

Design of Age-friendly Respiratory Rehabilitation Products Based on TAM

WANG Yizhang^1,*, YE Liang², GENG Li³

Author information +

文章历史 +

摘要

目的为提升慢性呼吸疾病老年患者对居家康复产品的接受度与使用体验,本文提出融合技术接受模型（TAM）的适老化康复产品设计研究方法。方法基于文献研究与用户需求调研,构建扩展TAM模型,引入感知信任、自我效能等变量;通过问卷调查收集155名慢性呼吸疾病老年患者及利益相关者的使用体验数据,采用偏最小二乘结构方程模型（PLS-SEM）验证各因素对使用意图的影响,并将分析结果反向指导产品的界面设计、交互流程及功能优化。结果感知易用性、感知有用性与自我效能均对使用意愿产生显著正向影响,感知信任无显著影响。基于上述结果,本文提出了基于模型的居家康复产品设计框架。结论融合技术接受模型的产品设计方法有助于提高老年慢性呼吸疾病患者对居家康复产品的使用意愿,为适老化康复产品开发提供理论依据与实践参考。

Abstract

To improve the acceptance and user experience of home-based rehabilitation products among elderly patients with chronic respiratory diseases, the work aims to propose an age-friendly rehabilitation product design research method integrating the Technology Acceptance Model (TAM). Based on the review of relevant literature and the user needs analysis, the extended TAM model was established, incorporating additional variables, including perceived trust and self-efficacy. Questionnaire surveys were conducted to collect use experience data from 155 elderly patients with chronic respiratory diseases and relevant stakeholders and the partial least squares structural equation modeling (PLS-SEM) was employed to examine the effects of these factors on use intention. The analysis results were applied in reverse to guide the interface design, interactive process and function optimization of the product. Perceived ease of use, perceived usefulness and self-efficacy had significant positive effects on use intention, whereas perceived trust did not exhibit a significant effect. Based on the above-mentioned results, a model-driven design framework for home-based rehabilitation products was put forward. The product design method integrating TAM helps improve the intention to use home-based rehabilitation products among elderly patients with chronic respiratory diseases, and provides theoretical basis and practical reference for the development of age-friendly rehabilitation products.

导出引用1

王翊璋, 叶亮, 耿丽. 融合技术接受模型的适老化呼吸康复产品设计研究[J]. 包装工程. 2026, 47(16): 341-350 https://doi.org/10.19554/j.cnki.1001-3563.2026.16.029

WANG Yizhang, YE Liang, GENG Li. Design of Age-friendly Respiratory Rehabilitation Products Based on TAM[J]. Packaging Engineering. 2026, 47(16): 341-350 https://doi.org/10.19554/j.cnki.1001-3563.2026.16.029

中图分类号： TB472

参考文献

[1] 张真真, 张艳燕, 郭盟凡. 中国老年人慢性呼吸系统疾病负担趋势及年龄-时期-队列分析[J]. 现代预防医学, 2025, 52(4): 608-615.
ZHANG Z Z, ZHANG Y Y, GUO M F.Trends in the Burden of Chronic Respiratory Diseases and Age-Period-Cohort Analysis in China's Elderly Population[J]. Modern Preventive Medicine, 2025, 52(4): 608-615.
[2] 赵杰, 丁菊花, 魏丽芝, 等. 老年COPD患者自我管理类型及特征的聚类分析[J]. 护理学杂志, 2022, 37(3): 88-92.
ZHAO J, DING J H, WEI L Z, et al.Identifying Self-Management Patterns and Characteristics in Elderly Patients with COPD Using Cluster Analysis[J]. Journal of Nursing Science, 2022, 37(3): 88-92.
[3] 余红梅. 便携式肺功能仪检测联合呼吸训练器对慢阻肺诊断及肺功能的影响[J]. 中国医疗器械信息, 2024, 30(22): 62-65.
YU H M.The Effect of Portable Pulmonary Function Analyzer Combined with Respiratory Trainer on the Diagnosis of Chronic Obstructive Pulmonary Disease and Lung Function[J]. China Medical Device Information, 2024, 30(22): 62-65.
[4] 洪洋, 王洁, 张霞芬, 等. 智能可穿戴设备BPMpathway在全膝关节置换术后患者居家康复中的应用效果[J]. 上海交通大学学报(医学版), 2024, 44(3): 342-349.
HONG Y, WANG J, ZHANG X F, et al.Efficacy of Smart Wearable Device BPMpathway in Home Rehabilitation of Patients after Total Knee Arthroplasty[J]. Journal of Shanghai Jiao Tong University (Medical Science), 2024, 44(3): 342-349.
[5] 王旭鹏, 李琳, 王芸倩, 等. 适老化矫形康复类可穿戴产品的设计方法研究[J]. 西安理工大学学报, 2024, 40(2): 234-241.
WANG X P, LI L, WANG Y Q, et al.Research on the Design Methods for Elderly-Oriented Wearable Orthopedic Rehabilitation Products[J]. Journal of Xi’an University of Technology, 2024, 40(2): 234-241.
[6] 孟青云, 刘观鑫, 许鑫, 等. 可重构多自由度踝关节康复机器人的设计与研究[J]. 中国康复医学杂志, 2025, 40(3): 427-432.
MENG Q Y, LIU G X, XU X, et al.Design and Research of Reconfigurable Multi-Degree-of-Freedom Ankle Rehabilitation Robot[J]. Chinese Journal of Rehabilitation Medicine, 2025, 40(3): 427-432.
[7] 康兆一, 冯蓬勃, 马洪涛, 等. 融合增强现实的下肢外骨骼康复体验设计研究[J]. 包装工程, 2024, 45(S1): 327-335.
KANG Z Y, FENG P B, MA H T, et al.Research on Rehabilitation Experience Design of Lower Limb Exoskeleton Integrated with Augmented Reality[J]. Packaging Engineering, 2024, 45(S1): 327-335.
[8] 刘桂森, 马悦霞, 贺子娟, 等. 呼吸训练器联合多波段光谱治疗仪在老年支气管哮喘-慢性阻塞性肺疾病重叠患者康复中应用[J]. 中国老年学杂志, 2022, 42(17): 4165-4168.
LIU G S, MA Y X, HE Z J, et al.Application of Breathing Trainer Combined with Multi-band Spectrum Therapeutic Apparatus in Rehabilitation of Elderly Patients with Asthma-Chronic Obstructive Pulmonary Disease Overlap[J]. Chinese Journal of Gerontology, 2022, 42(17): 4165-4168.
[9] 赵文, 王灿, 李丽文. 以行动研究法为指导的组合式呼吸训练对老年慢性阻塞性肺疾病的效果[J]. 中国康复理论与实践, 2025, 31(12): 1464-1471.
ZHAO W, WANG C, LI L W.Effect of Comprehensive Respiratory Training Using Action Research Method on Old Patients with Chronic Obstructive Pulmonary Disease[J]. Chinese Journal of Rehabilitation Theory and Practice, 2025, 31(12): 1464-1471.
[10] 张磊, 郑杰, 赵亚菲, 等. 从现代设计走向创新设计[J]. 机械设计, 2024, 41(8): 1-5.
ZHANG L, ZHENG J, ZHAO Y F, et al.From Modern Design to Innovative Design[J]. Journal of Machine Design, 2024, 41(8): 1-5.
[11] DAVIS F D. Perceived Usefulness, Perceived Ease of Use, and User Acceptance of Information Technology[J]. MIS Quarterly, 1989, 13(3): 319-340.
[12] CHEN K, CHAN A H S. Gerontechnology Acceptance by Elderly Hong Kong Chinese: A Senior Technology Acceptance Model (STAM)[J]. Ergonomics, 2014, 57(5): 635-652.
[13] VENKATESH V, MORRIS M G, DAVIS G B, et al.User Acceptance of Information Technology: Toward a Unified View[J]. MIS Quarterly, 2003, 27(3): 425-478.
[14] BANSAL G, ZAHEDI F, GEFEN D.The Impact of Personal Dispositions on Information Sensitivity, Privacy Concern and Trust in Disclosing Health Information Online[J]. Decision Support Systems, 2010, 49(2): 138-150.
[15] 刘卓, 乔元杰. 基于改进技术接受模型的老年智能助行器设计[J]. 机械设计, 2024, 41(12): 175-180.
LIU Z, QIAO Y J.Design of Smart Walking Aids for the Elderly Based on Improved Technology Acceptance Model[J]. Journal of Machine Design, 2024, 41(12): 175-180.
[16] 杨超翔, 徐茵苡, 叶俊男. 技术接受引导的医护床适老化设计策略分析[J]. 机械设计与制造, 2026(3): 360-363.
YANG C X, XU Y Y, YE J N.Design Strategy of Nursing Bed for Elderly Oriented by Technology Acceptance[J]. Machinery Design & Manufacture. 2026(3): 360-363.
[17] 蒋开玥, 邵荃. 基于技术接受模型的旅客对机场智能化设施使用意愿分析[J]. 科学技术与工程, 2023, 23(13): 5777-5784.
JIANG K Y, SHAO Q.Analysis of Passengers' Willingness to Use Intelligent Facilities in Airports Based on Technology Acceptance Model[J]. Science Technology and Engineering, 2023, 23(13): 5777-5784.
[18] HAIR J F, HULT G T M, RINGLE C M, et al. Partial Least Squares Structural Equation Modeling (PLS-SEM) Using R: A Workbook[M]. Cham: Springer International Publishing, 2021.
[19] LI J L, CHE ME R, AHMAD F A, et al.Development and Validation of an Ageing-Oriented Smart Products Design Framework Based on Technology Acceptance Model (TAM)[J]. Disability and Rehabilitation: Assistive Technology, 2026, 21(4): 1263-1289.
[20] KHAN T, KHAN K D, AZHAR M S, et al.Mobile Health Services and the Elderly: Assessing the Determinants of Technology Adoption Readiness in Pakistan[J]. Journal of Public Affairs, 2022, 22(4): e2685.
[21] VENKATESH V, BALA H.Technology Acceptance Model 3 and a Research Agenda on Interventions[J]. Decision Sciences, 2008, 39(2): 273-315.
[22] KANO N, SERAKU N, TAKAHASHI F, TSUJI S.Attractive Quality and Must-Be Quality[J]. 1984, 14(2): 147-156.
[23] CULNAN M J, ARMSTRONG P K. Information Privacy Concerns, Procedural Fairness,Impersonal Trust: An Empirical Investigation[J]. Organization Science, 1999, 10(1): 104-115.