文章摘要
李雪楠,赵江洪,赵丹华.基于情境分类的3D打印交互信息模型构建[J].包装工程,2019,40(2):128-133
基于情境分类的3D打印交互信息模型构建
The Modeling of 3D Printing Interaction Information Based on Context Classification
投稿时间:2018-09-26  修订日期:2019-01-20
DOI:10.19554/j.cnki.1001-3563.2019.02.022
中文关键词: 情境  交互设计  情境建模  3D打印软件
英文关键词: context  interaction design  context modeling  3D printing software
基金项目:国家自然科学基金(51605154);省重点研发计划(2016GK2010);中央高校基本科研业务经费
作者单位
李雪楠 1.湖南大学 汽车车身先进设计制造国家重点实验室长沙 410082 
赵江洪 2.湖南大学 设计艺术学院长沙 410082 
赵丹华 2.湖南大学 设计艺术学院长沙 410082 
摘要点击次数: 102
全文下载次数: 94
中文摘要:
      目的 基于复杂情境中交互信息的属性与表征,为平台化编辑型软件设计提供一种复杂信息的分类与组织方法。方法 从交互设计角度,运用文献研究、比较分析法以及案例推理法,对复杂情境中的交互信息进行属性与表征分析,比较不同角度中情境建模思路的差异性,并构建以交互设计角度为切入点的情境模型,最后通过笔者参与的设计实践进行实例验证。结果 通过情境建模,可以看出复杂情境信息一般分为内容与流程两种属性,同时也存在属性的交叉,其中内容层面的非结构化信息为设计的重点。结论 通过实例验证来看,基于复杂情境的交互信息模型可以将设计信息进行有效分类组织,为基于3D打印的平台化编辑型软件的设计与开发提供了一种辅助设计思路。
英文摘要:
      The work aims to provide a classification and organization method of complex information for platform-based editing software design, based on the attributes and representations of interaction information in complex context. From the perspective of interaction design, the methods of literature research, comparative analysis and case reasoning were used to analyze the attributes and representations of interaction information in complex context, compare the differences of context modeling ideas in different perspectives, and construct a context model starting from the perspective of interaction design. Finally, the example was verified by the design practice in which the author participated. Through context modeling, it could be seen that complex context information was generally divided into two attributes: content and process, and there was also a cross of attributes, among which non-structural information at the content level was the focus of the design. From the example verification, the interaction information modeling in complex context can classify and organize the design information effectively, which provides an auxiliary design idea for the design and development of the platform-based editing software based on 3D printing.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第6564653位访问者    渝ICP备10003521号-4

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023—68792836传真:023—68792396 Email: designartj@126.com

    

  
 

渝公网安备 50010702501717号