| 陈登凯,乔一丹,刘佳璇,高馨薇,刘子琦.基于复合仿真技术的武器装备工业造型设计方法[J].包装工程,2021,42(20):49-58. |
| 基于复合仿真技术的武器装备工业造型设计方法 |
| Industrial Modeling Design Method of Weaponry Based on Composite Simulation Technology |
| 投稿时间：2021-07-12 |
| DOI：10.19554/j.cnki.1001-3563.2021.20.003 |
| 中文关键词: 武器装备 仿真技术 隐身性 有限元分析 造型设计 |
| 英文关键词: weaponry simulation technology stealthy performance finite element analysis modeling design |
| 基金项目:国家重点研发计划项目(2019YFB1405702);中央高校基本科研业务费资助项目(31020190504007) |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 将仿真技术作为武器装备工业造型设计中的重要手段，使国防武器装备在满足隐身性能和结构强度的要求下，提升装备工业造型的视觉气质。方法 首先依据隐身理论提出武器装备造型的隐身设计策略，然后利用隐身仿真技术与有限元仿真技术对武器装备工业造型方案进行隐身性分析、静力学分析、动力学分析以选出最优设计方案，并找到方案中的结构薄弱部位，最后通过结构优化方法对其薄弱部位进行造型优化设计。结论 以舰载雷达天线座为例验证了基于隐身分析与有限元分析的工业造型设计方法可应用在武器装备领域。 |
| 英文摘要: |
| This paper aims to improve the visual impression of weaponry industrial modeling by using simulation technology as an important means, without reducing the performance and structural strength. First, the stealth design strategy of weaponry modeling is proposed based on the stealth theory. Then, the stealth analysis, static analysis and dynamic analysis of weaponry industrial modeling scheme are carried out by using stealth simulation technology and finite element simulation technology, so as to select the optimal design scheme and find the weak parts of the structure. Finally, the weak parts are optimized based on the structural optimization method. The Industrial modeling design method based on stealth analysis and finite element analysis proves applicable to the field of weaponry design by taking the shipborne radar antenna pedestal as an example. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
